907x-CFV50c and Elinchcrom studio flash

[Marengo]

¿Alguien sabe cómo usar el 907x-CFV50c con flashes de estudio? Estoy usando el cable que venía con la cámara conectada al cable de sincronización de los flashes Elinchrom
y no funcion
Agradecería cualquier sugerencia.

 

[dirk]

Please English only.

 

[Marengo]

Sorry. Does anyone know how to use the 907x-CFV50c with studio flashes? I'm using the cable that came with the camera connected to the sync cable of the Elinchrom flashes, and it doesn't work.
I'd appreciate any suggestions.

 

[135mm]

the digital back has a flash out 2.5mm opening. I am guessing that's what you are talking about can you check for continuity on your cables? i.e. that the signal gets transmitted?

 

[Marengo]

Thanks for your reply.
I do indeed connect the cable to the flash output and the other end (PC) to the sync cable. And the sync cable works because I've tested it with other cameras. I've also used other connections and other flashes, and it still doesn't work.

 

[135mm]

I suggest you test it with another flash to narrow it down, i.e. b/w the back and a flash directly?

 

[Marengo]

I'll try it, thanks.

 

[Marengo]

I suggest you test it with another flash to narrow it down, i.e. b/w the back and a flash directly?

Well, it was the flash output sync cable that comes in the box with the 907x and the CFV 50. That is, it came defective from the factory. I ordered a new one from Hasselblad, and all the flashes work correctly.