Medium Format Forum

Register a free account now!

If you are registered, you get access to the members only section, can participate in the buy & sell second hand forum and last but not least you can reserve your preferred username before someone else takes it.

Which lenses support AFC on X2Dii?

From the support tab on the Hasselblad site (apparently I am unable to post a link):

Screenshot 2025-09-06 at 4.18.48 PM.png
 
Not yet, at least. I have read the the older lens focusing gears may not be able to stand up to the rigors of the continuous auto focus. Apparently that also applies to the 20-35E which is a head scratcher since it the most recent released lens before the 35-100E. Maybe further firmware updates will be able to marginalize the perceived (at least for now) wear issues. It's a shame - but the AF-S still works on those and the 80 and 65 are such superb lenses.
 
I should add that the 35-100mm is also AF-C capable but not included in that firmware update referenced above. Also, from Hassy support, "AF-C is not available when using the electronic shutter. This cannot be enabled for other lenses through future firmware updates. In low-light conditions, autofocus performance may decrease due to reduced light reflection from the subject. The lens focus difference is not obvious, please note that it depends on your focus object."
 
I wrote to Hasselblad support a while ago, but I think their release notes now lists in the notes, supported lenses.

.
For continuous autofocus (AF-C), the following lenses are fully supported on the new camera (with their latest firmware installed):

XCD 2,8–4/35–100E
XCD 2,5/25V
XCD 2,5/38V
XCD 2,5/55V
XCD 2,5/90V
XCD 4/28P
XCD 3,4/75P
Please note the following limitations:
AF-C is not available when using the electronic shutter.This cannot be enabled for other lenses through future firmware updates.

In low-light conditions, autofocus performance may decrease due to reduced light reflection from the subject.The lens focus difference is not obvious, please note that it depends on your focus object


.
 
Back
Top