winding crank on 203FE/205FCC same part as 500 series?

[ymc226]

I am using Winder F's on my 205FCC and 203FE and want spare manual winder cranks as when the batteries die mid-wind on the motorized winder, one needs to take off the Winder F and use the hand crank to manually wind the shutter to reset it.

Do any of the 500 series winder crank part work on the 200 series as well?

 

[Olof B]

What you need is Wind Crank TCC or Wind Crank E.
They are the same but the "E" is with slightly different external design.

These Wind Cranks are for all 200-bodies and 503CXi and CW's.

So the Rapid Wind Cranks 1 and 2 for the 500-bodies will not fit.
If the Wind Crank 2000FCW will fit, I don't know.

 

[ymc226]

What you need is Wind Crank TCC or Wind Crank E.
They are the same but the "E" is with slightly different external design.

These Wind Cranks are for all 200-bodies and 503CXi and CW's.

So the Rapid Wind Cranks 1 and 2 for the 500-bodies will not fit.
If the Wind Crank 2000FCW will fit, I don't know.

Thanks Olof,

I just called Hasselblad USA parts and they thought the wind cranks for the 503CXi/CW would not work but weren't sure.

Did I understand correctly from your post above that the wind crank for the 503CXi and CW will work on the 203FE or 205FCC?

 

[Olof B]

Well the answer I gave you is what I could read from The Hasselblad Compendium, 2nd edition, of Richard Nordin.
So I'm sorry I cant give you any more in-depth answer.